Sighting In - An Ethical Hunters Responsibility
Author: David Selman, Tracker-Outdoors.com
It is absolutely necessary to sight in your deer rifle before
you go hunting. You owe it to the deer to make certain your
rifle shoots where you point it. Even if you just bought a rifle
and the store bore-sighted the gun with a collimator, you still
need to shoot it and fine-tune the point of impact.
Bore-sighting can be precise and can make a rifle shoot close
enough to hit a paper target at 25 yards, but it's not meant to
be a substitute for sighting in the rifle on a range.
Twenty-five yards is where you should start shooting when you
take a new rifle to the range. You can get a friend to sight in
your rifle for you, but I do not recommend doing so. You need to
know how to make adjustments to your sights, no matter if you
shoot a scope or open sights.
If your sights get knocked off while you're hunting, you'll have
to resight the rifle yourself, and you need to know how it
works. Besides, the more you shoot your rifle at targets, the
more likely you are to make an accurate shot on a deer. Take
your rifle to a range where you have a solid bench to shoot
from. Use sand bags to create a solid rifle rest. Most popular
deer rifles that are shooting slightly low at 25 yards will be
about 2 inches high at 100 yards. Hunters who take shots out to
200 or 300 yards usually sight in a little high at 100 yards. If
you never take a shot beyond 100 yards, sight in to be dead on
at that distance.
Any time you put a rifle on an airplane, you should shoot it at
a target before you hunt. For that matter, you should fire at a
target every now and then throughout the hunting season.
Once sighted in, most hunting rifles are very reliable, but even
the most accurate rifle can be "off" if it's knocked around
enough.
